D-Link DWL-7700AP Command Line Interface Reference Manual page 17
802.11a/b/g access point
Hide thumbs
Also See for DWL-7700AP:
- Product manual (125 pages) ,
- Manual (106 pages) ,
- User manual (84 pages)
Table of Contents
Advertisement
set multi-ethnotag
Set Individual Eth No Tag State
set multi-vlanpri
Set Vlan-Priorityi for Multi-SSID
set VlantagType
Modify Vlantag Type
set multi-vlantagtype
Set Vlan-Tag Typefor Multi-SSID
set multi-state
Enable or Disable Multi-SSID Features
set multi-ind-state
Enable or Disable specifically Mulit-SSID
set multi-ssid
Set Service Set ID for Multi-SSID
set multi-ssidsuppress
Enable or Disable to broadcast SSID of Multi-SSID
set multi-authentication
Set Authentication Type for Multi-SSID
set multi-cipher
Set Cipher for Multi-SSID
set multi-encryption
Set Encryption Mode for Multi-SSID
set multi-keyentrymethod
Select Encryption Key Entry Method for Multi-SSID
set multi-vlantag [tag value]
Set VLAN Tag For Multi-SSID
[index]
set multi-key
Set Encryption Key for Multi-SSID
set multi-keysource
Set Source Of Encryption Key For Multi-SSID
set multi-passphrase
Set PassPhrase for Multi-SSID
set multi-dot1xweptype
Set 802.1x Wep Key Type For Multi-SSID
Routing Commands (Spaning Tree Protocol)
Set Command:
Function
rstp getstate
Show Spanning Tree State
rstp getstp
Show Spanning Tree Settings
rstp getport
Show STP Port Settings
802.11 a/b/g Access Point Command Line Interface Manual
15
set multi-ethnotag [index] [disable:enable]
set multi-vlanpri [pri value] [index]
set VlantagType [1:2]
set multi-vlantagtype [tagType value] [index]
set multi-state [disable:enable]
set multi-ind-state [disable:enable] [index]
set multi-ssid [index] <ssid name>
set multi-ssidsuppress [disable:enable]
set multi-authentication
[open-system:shared-key:wpa:wpa-psk:wpa2:wpa2-psk:wpa-auto:w
pa-auto-psk:8021x] [index]
set multi-cipher [wep:aes:tkip:auto] [index]
set multi-encryption [disable:enable] [index]
set multi-keyentrymethod [hexadecimal:asciitext] [index]
set multi-vlantag [tag value] [index]
set multi-key default [key index] [Multi-SSID index]
set multi-dot1xweptype [flash:server:mixed] [index]
Explanation:
flash=Set All Keys Will Be Read From Flash:
server=Set All Keys Will Be Derived From Authentication Server
mixed= Set Keys Read From Flash Or Derived From Authentication
Server
set multi-passphrase [index] <passphrase>
set multi-dot1xweptype [static: dynamic] [index]
Syntax
rstp getstate
rstp getstp
rstp getport
Advertisement
Table of Contents
