D-Link DWL-7700AP Command Line Interface Reference Manual page 14

Security
Del Command:
del key Delete Encryption key
Get Command:
get encryption Display (WEP) configuration state (enabled or disabled)
get authentication Display Authentication Type
Display Encryption cipher type
Explanation:
get cipher
Display Source Of Encryption Keys:
Explanation:
get keysource
get key Display specified WEP encryption Key
get keyentrymethod Display Encryption Key Entry Method ASCII or Hexadecimal
get groupkeyupdate Display WPA Group Key Update Interval (in Seconds)
get defaultkeyindex Display Active Key Index
get dot1xweptype Display 802.1x Wep Key Type
get reauthperiod Display Manual Reauthentication Period
Set Command:
set encryption Enable or Disable Encryption Mode
set authentication Set Authentication Type
set cipher Set Cipher of wep, aes, tkip, or auto negotiate
set groupkeyupdate Set Group Key Update Interval (in Seconds) for TKIP
set key Used to set the specified wep key value and size
set keyentrymethod Select Between ASCII or HEX encryption key format
set keysource Select Source of Encryption Keys: static(flash), dynamic (server), mixed set keysource [flash:server:mixed]
set passphrase Modify Passphrase
set dot1xweptype Set 802.1x Wep Key Type
set reauthperiod Set Manual Reauthentication Period
802.11 a/b/g Access Point Command Line Interface Manual
Function
Function
Response WEP for choosing WEP
Response Auto for choosing WPA-Auto
Resopnse AES for choosing WPA-AES
Response TKIP for choosing WPA-TKIP
Response Flash Memory for static key
Response Key Server for dynamic key
Response mixed for mix static and dynamic key
Function
del key [1-4]
get encryption
get authentication
get cipher
get keysource
get key [1-4]
get keyentrymethod
get groupkeyupdate
get defaultkeyindex
get dot1xweptype
get reauthperiod
set encryption [disable: enable]
set authentication [open-system: shared-key: auto:8021x: WPA:
WPA-PSK: WPA2: WPA2-PSK:WPA-AUTO:WAP2-AUTO-PSK]
set cipher [wep:aes:tkip:auto]
set groupkeyupdate <seconds>
set key [1-4] default
set key [1-4] [40:104:128] < value>
set keyentrymethod [asciitext : hexadecimal]
set passphrase <new passphrase>
set dot1xweptype [static: dynamic]
set reauthperiod <xxxx>
Explanation: <xxxx> is new priod.
12
Syntax
Syntax
Syntax