Radius Server Commands - D-Link DWL-7700AP Command Line Interface Reference Manual

Get Command: Function
get radiusname Display RADIUS server name or IP address
get radiusport Display RADIUS port number
get accountingstate Display Accounting Mode
get accountingname Display Accounting server name or IP address
get accountingport Display Accounting port number
get accounting2ndstate Display second Accounting Mode
get accounting2ndname Display second Accounting server name or IP address
get accounting2ndport Display second Accounting port number
get accountingcfgid Display the configuration of Accounting now
Set Command: Function
set radiusname Set RADIUS Server name or IP address
set radiusport Set RADIUS port number
set radiussecret Set RADIUS shared secret
set accountingstate Set Accounting Mode
set accountingname Set Accounting name or IP address
set accountingport Set Accounting port number
set accounting2ndstate Set second Accounting Mode
set accounting2ndname Set second Accounting server name or IP address
set accounting2ndport Set second Accounting port number
set accountingcfgid Set the configuration of Accounting now
802.11 a/b/g Access Point Command Line Interface Manual
18
8
R S
ADIUS ERVER
Syntax
get radiusname
get radiusport
get accountingstate
get accountingname
get accountingport
get accounting2ndstate
get accounting2ndname
get accounting2ndport
get accountingcfgid
Syntax
set radiusname <DNS name::xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set radiusport <xxxxx>
Explanation: <xxxxx> is port number, default value is 1812
set radiussecret
set accountingstate [enable:disable]
set accountingname [xxx.xxx.xxx.xxx : servername]
set accountingport <xxxxx>
Explanation: <xxxxx> is port number, default value is 1813.
set accounting2ndstate [enable:disable]
set accounting2ndname [xxx.xxx.xxx.xxx : servername]
set accounting2ndport <xxxxx>
set accountingcfgid
C
OMMANDS