Part Names And Descriptions Of The Digital Operator - Omron 3G3RX User Manual

3-7 Part Names and Descriptions of the Digital Operator

3-7 Part Names and Descriptions of the
Digital Operator
Part Names and Descriptions
3
WARNING
3-17
RUN LED
POWER LED
LCD display
REMOTE LED
KEY
ENABLED LED
Name
POWER LED indicator Light on when the power is supplied to the LCD digital operator.
RUN LED indicator Light on when the Inverter is runing.
WARNING LED Light on when set value is incorrect.
indicator
ALARM LED indicator Light on when the Inverter trips.
Light on when the REMOTE key makes the compulsion
operation function effective. It doesn't light when the
Remote LED
compulsion operation function is effective by input terminal
OPE. (Press the key more than 2 seconds)
Light on only when operation command is set in LCD digital
Key Enabled LED
operator.
Displays relevant data, such as frequency reference, output
LCD Display current, and set values.
It changes from Local to Remote mode. Press the key during 2
seconds to change from Local to Remote or Remote to Local.
LOCAL REMOTE key When it is in Local the OPE led will be ON. Use Local to control
the motor with LCD digital operator keys (Run Fwd, Run Rev
and Stop/Reset).
It transfers inverter parameters to the LCD digital operator's
READ key
memory.
It copies one Parameter Set or a Parameter Set + Drive
WRITE key
Programming saved in LCD digital operator to the inverter.
It returns to the above layer.
ESC key
It jumps to the below layer or stores the change introduces on
SET key
the edit layer (after that it jumps to the above layer).
WARNING LED
ALARM LED
OPERATION
KEY
Function