Yaesu FT-891 Advance Manual page 19

CW Mode Operation
Text Message Programming with the Optional FH-2
1. Set the operating mode to CW.
2. Press the [ MEM ] key on the FH-2. A blinking
"REC" icon will appear in the display.
3. Press any of the FH-2 keys numbered [ 1 ]
through [ 5 ] , to select the desired CW Mem-
ory Register that you wish to program with
text.
4. Press the [ MEM ] key on the FH-2. The text
input screen will appear.
5. Rotate the MULTI function knob to select
the letters, numbers, or symbols of the de-
sired label, then press the MULTI function
knob.
6. Press the MULTI function knob.
7. Repeat step 5 and 6 to program the remaining letters, numbers, or symbols of the
desired text. Up to 50 characters may be stored in each of the five memories.
r Rotate the MULTI function knob to set the cursor position and press the [ B ]( CE )
key to erase and input characters.
8. When the message is complete, add the "}" character at the end to signify the termi-
nation of the message.
9. When the text entry is complete, press the [ B ]( ENT ) key.
10. Press and hold the FH-2 [ MEM ] key for one second to exit the text input screen and
resume normal operation.
19 FT-891 Advance Manual