Yaesu FT-891 Advance Manual page 13

CW Mode Operation
Message Memory Programming with the Optional FH-2 (Using the Keyer Paddle)
1. Set the operating mode to CW.
2. Set the "BK-IN" feature to "OFF".
3. Turn the internal Electronic Keyer "ON".
4. Press the [ MEM ] key on the FH-2. A blinking
"REC" icon will appear in the display.
5. Press any of the FH-2 keys numbered
[ 1 ] through [ 5 ] to begin the memory stor-
age process, and the "REC" icon will glow
steadily.
6. Send the desired message using the keyer
paddle.
NOTE: If you do not start keying within ten
seconds, the memory storage pro-
cess will be canceled.
7. Press the [ MEM ] key on the FH-2 once
more at the end of your message. Up to 50
characters may be stored in each of the five
memories.
NOTE: Care must be exercised when
sending to ensure that the spaces
between letters and words are ac-
curately done; if the timing is off,
the spacing may not come out right
in the stored message. For ease in
setting up the keyer memories, we
recommend setting Menu item "04-
01 [ KEYER TYPE ] " to "ACS" ( Au-
tomatic Character Spacing ) while
programming the keyer memories.
13 FT-891 Advance Manual