Optional Fh-2 Remote Control Switches - Yaesu FT-891 Advance Manual

Optional FH-2 Remote Control Switches

Voice Memory: 5 Memory Channels for the Memory Keyer
In the case of Voice Memory, up to 20 seconds of audio may be stored on each channel.
"MESSAGE Memory" and "TEXT Memory" are available for the Contest Memory
Keyer. Each "MESSAGE Memory" channel is capable of retaining a 50-character
CW message using the PARIS standard for characters and word length. Each "TEXT
Memory" channel is capable of retaining a maximum of 50 characters.
Cursor Buttons
The cursor may be moved in 2 different directions ( right/left ) . Usually, these buttons
are used for tuning the VFO frequency. Press the [ p ] / [ q ] buttons to change the
frequency in the same increments as the microphone [ UP ] / [ DWN ] switches. Press the
[ t ] / [ u ] buttons to change the frequency by 100 kHz steps.
[ P/B ] button
When entering CW text, a space may be inserted where the cursor is flashing.
[ LOCK ] button
The FH-2 key buttons may be locked by setting this switch to "ON".
[ MEM ] button
Press this button to store either a Voice Memory, or a Contest Keyer Memory.
[ DEC ] button
When utilizing the sequential contest number capability of the Contest Keyer, press
this button to decrement ( decrease ) the current Contest Number by one digit ( i.e. to
back up from #198 to #197, etc. ) .
①
②
③
102
④
⑤
⑥
FT-891 Advance Manual