Instrument Display - Furuno TZTL15F Operator's Manual

Instrument Display

With connection of appropriate sensors, the instrument display shows various navigation data.
How to enable the instrument display How to enable the instrument display
Add an instrument display icon to the home to screen to show the instrument display.
How to switch instrument displays (ex. full display)
How to edit an instrument display How to edit an instrument display
Tap
Tap the instrument display,
then tap [Edit Page] on the
pop-up menu.
How to remove or change an indication
Tap
In the edit mode, tap the
indication to remove or
change.
How to add an indication
Tap
In the edit mode, tap a location
not occupied by an instrument
display.
Tap
Swipe up or down
to switch between
Full 1 display Full 1 display
displays.
Edit mode Edit mode Edit mode Edit mode Edit mode
A blue line surrounds each
indication.
Tap a size in desired category
([Graphic], [Numeric], Highway]).
Tap
After setting, tap [ ].
(Incorporation in 3-way
screen is also possible.)
Full 2 display Full 2 display
In the edit mode, you can remove,
change, add, rearrange indications.
To end the edit mode To end the edit mode To end the edit mode To end the edit mode To end the edit mode
Tap the screen, then tap [End Edit] on
the pop-up menu.
- Remove indication: Tap [Remove].
- Change size: Tap [Small]*, [Medium], or
[Large].
- Change type: Tap [Change Type].
- Change indication: Tap indication in
[NAVIGATION DATA], [ROUTE INFOR-
MATION], [WIND AND WEATHER].
* Graphic, digital only
Added item appears at tapped
location.
14
Drag