Pluggable Transceiver Specifications; Com Port Pinout Assignments; Compliance - Extreme Networks SSA-G8018-0652 Hardware Installation Manual

Table 20: Environmental Characteristics
Operating Temperature
Storage Temperature
Operating Relative Humidity

Pluggable Transceiver Specifications

For SFP and SFP+ transceiver specifications, refer to the datasheet at:
www.extremenetworks.com/product/transceivers/.

COM Port Pinout Assignments

The COM port is an RJ45 communications port for local access to local management. Refer to
for the COM port pin assignments.
Table 21: COM Port Pin Assignments
Pin Signal Name
1 Transmit Data (XMT)
2 Data Carrier Detect (DCD)
3 Data Set Ready (DSR)
4 Receive Data (RCV)
5 Signal Ground (GND)
6 Data Terminal Ready (DTR)
7 Request to Send (RTS)
8 Clear to Send (CTS)

Compliance

The SSA switch meets the safety, electromagnetic compatibility (EMC), and environmental
requirements listed in
S-Series Stand Alone (SSA) Switch Hardware Installation Guide
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 95% (non-condensing)
Table 22.
Specifications
http://
Table 21
Input/Output
Output
Output
Input
Input
NA
Output
Input
NA
45