Chapter 1: Introduction; Ssa-T8028-0652 - Extreme Networks SSA-G8018-0652 Hardware Installation Manual

1
Introduction

SSA-T8028-0652

SSA-G8018-0652
AC Power Supplies
Fans
Micro-USB Port
Management
Virtual Switch Bonding
This chapter provides an overview of the capabilities of the following Extreme Networks S-Series SSA
models:
•
SSA-T8028-0652
•
SSA-G8018-0652
For information about firmware features of the SSA switch and how to configure them, refer to the
K-, and 7100 Series Configuration
SSA-T8028-0652
The SSA-T8028-0652 has forty-eight 10/100/1000BASE-T RJ45 ports and four 10GBASE-X SFP+ ports,
as shown in Figure
Figure 1: SSA-T8028-0652 I/O Port Panel
1 = COM port
2 = System LEDs
3 = Micro-USB port
4 = 10/100/1000BASE-T RJ45 ports
Each of the 10/100/1000BASE-T RJ45 ports operates in full-duplex mode.
The SFP+ ports support a number of pluggable transceivers. For more information about the
transceivers, see http://www.extremenetworks.com/product/transceivers/.
S-Series Stand Alone (SSA) Switch Hardware Installation Guide
Guide.
1.
5 = 10GBASE-X SFP+ ports
6 = Mounting ears
7 = Ground receptacle
S-,
8