WESTINGHOUSE PACKAGE A/C MANUAL
○
. Press "MODE" button, select "DRY" mode.
1
○
. Press temperature adjust button to select setting temp.
2
○
. Press "ON/OFF" button, indoor unit operation lamp on, it works in dry mode. Press ON/OFF button again, it
3
stops to work.
○
. In dry mode, economy operation and fan speed are ineffective.
4
Timer setting
Timer on only:
○
. Press "TIME ON" button, it display "SET" on LCD, and display "H" and "ON" , it is waiting for timer on
1
setting.
○
. Press " timer " on button repeatedly to adjust time setting.
2
○
. If press this button and hold on, the time will increase at 0.5h, after 10h, it increases at 1h.
3
○
. After setting 0.5 second, the wired controller send timer on information, it is finished.
4
Timer off only:
○
. Press "TIME OFF " button, it display "SET" on LCD, and display " H " and ON, it is waiting for timer on
1
setting.
○
. Press "TIME OFF" button repeatedly to adjust time setting.
2
○
. If press this button and hold on, the time will increase at 0.5h, after 10h, it increases at 1h.
3
○
. After setting 0.5 second, the wired controller send timer off information, it is finished.
4
TIMER ON AND TIMER OFF BOTH
○
. Set timer on time as the corresponding step1 and 2.
1
○
. Set timer off time as the corresponding step1 and 2.
2
○
. Timer off time must be longer than timer on time.
3
○
. 0.5 second after setting, the wired controller send information, the setting is finished.
4
Change timer
If there is a timer of changing time to be need, press corresponding button to revise it. If cancel timer, change
time to 0.0.
NOTE: The timer time is relative time, that is delay after setting time ( i, e: setting time is 8:05 A,M). So when
timer is set, the standard time cannot be adjusted.
8. Technical indication and requirement
EMC and EMI comply with the CE certification requirements.
16.2 Optional wired controller:
KJR-23B: For cooling only and cooling with auxiliary heater
KJR-25B: For Cooling and heating
KJR-23B
102
R-410A : 220V: 60Hz
KJR-25B