Reset Button; On/Off Button; Economy Operation Button; Fan Speed Button - Westinghouse WPAXH-060CA4 Service Manual

WESTINGHOUSE PACKAGE A/C MANUAL
⑥ Reset button(hidden):
Use a 1mm stick to press in the little hole , then the current setting is canceled . The wired controller will enter
into original state.

⑦ON/OFF button:

When in off state, press this button, the indicator is on, the wired controller enter into on state, and send
setting information to in door PCB. When in on state, press this button, the indicator is off, and send
instruction. If timer on or timer off has been set, it cancel this setting then send instruction to stop the
machine.
⑧ Adjust button ▲:
Set indoor temperature up. If press and hold on, it will increase at 1 degree per 0.5 second.
⑨ Adjust button ▼ :
Set indoor temperature down. If press and hold on, it will decrease at 1degree per 0.5 second.
⑩ Swing button:
First pressing: start swing function; second pressing: stop swing. (Match to some model with swing function).
○

1 1 Economy operation button:

Press this button, the indoor unit operates in economy mode, press it again, exit this mode (it may be
ineffective for some models)
○

1 2 Fan speed button:

Press this button consecutively, the fan speed will circle as follow:
○
1 3 Lock button (hidden):
When you push the LOCK button, all current settings are locked in and the wired controller does not accept
any operation except that of the LOCK button. Use the lock mode when you want to prevent setting from
being changed accidentally or play fully. Push the LOCK button again when you want to cancel the LOCK
mode.
7. Using method
Automatic operation
Connect to power, indoor operation lamp flash.
○ . Press "MODE" button, select " AUTO " ;
1
○ . Press the button "▲" and "▼", set temperature you want, generally it is among 17℃~30℃;
2
○ . Press "ON/OFF" button, operation lamp is on, the air-conditioner work in auto mode, indoor fan is auto, and
3
cannot be changed. Auto is displayed on LCD. Press " ON/OFF" button again to stop.
○ . Economy operation is valid in auto mode.
4
Cool/Heat/Fan mode operation
○ . Press "MODE" button, select "COOL", "HEAT" or "FAN ONLY" mode.
1
○ . Press temperature adjust button to select setting temp..
2
○ . Press "FAN SPEED" button to select high/mid/low/auto.
3
○ . Press "ON/OFF" button, indoor unit operation lamp on, it works in selected mode. Press "ON/OFF" button
4
again, it stops to work.
Remark: When in fan mode, no temperature can be set.
Dry operation
R-410A : 220V: 60Hz
101