Driving Position Memory System - Lexus GS430 User Manual

OCCUPANT RESTRAINT SYSTEMS
DRIVING POSITION MEMORY
SYSTEM
A microcomputer will memorize the position of the driver's
seat, and the positions of the tilt and telescopic steering, and
outside rear view mirrors. Three different driving position
profiles can be entered into the computer's memory.
Recording a driving position in the computer's memory can
only be done when the engine switch is selected in "IG−ON"
mode and the selector lever is in the "P" position.
Setting the driving position
G16068
1. Adjust the driver's seat, tilt and telescopic steering and
outside rear view mirrors to the desired position.
2. While pushing the "SET" button, push button "1","2" or
"3" until the signal beeps.
202
The beep sound means that the positions are recorded in the
computer's memory.
By repeating these two steps and pressing the remaining
button, the driving position for another driver can be recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized position,
the easiest way is to first activate the memorized position, then
make the desired changes and perform step 2 above.
Recalling the memorized position
G16069
When you push button "1", "2" or "3", the driving position
will be automatically adjusted to the position recorded for
that button.