Table of Contents
Advertisement
EMBER PLACEMENT
WARNING: Do not operate unit
without ember material correctly
in place as shown in Figures 50
& 51. Do NOT place ember mate-
rial anywhere else on the unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro-
duce carbon monoxide or soot. If
replacement embers are needed,
the replacement embers must be
purchased from IHP. See Page 41
for part numbers.
WARNING: All previously ap-
plied loose material must be re-
moved prior to reapplication.
Ember Material
Glowing Embers
Figure 51 - Placement of Glowing Embers (shown with Platinum Bright Embers)
126818-01C
INSTALLATION
Continued
1. Two ember materials are supplied with
2. Add Volcanic Stone and small decorative
Figure 50 - Platinum Bright Embers
SuperiorFireplaces.US.com
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see Parts,
Page 41.
Platinum Bright Ember placement. Add
embers to front, fl at burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
fl at burner just behind horizontal ports as
shown in Figure 50.
Glowing Embers placement. Place
Glowing Embers material on front fl at
burner in areas away from ports as shown
in Figure 51.
logs around base of appliance if desired.
DO NOT place rock or additional logs
on front burner or on logs. Placing any
material on unit other than ember material
on front burner may result in production
of carbon monoxide or soot.
Flat Front Burner
23
Advertisement
Table of Contents
