Table of Contents
Advertisement
CAUTION: Do not pick up
appliance base assembly by
burners. This could damage
appliance. Only handle base
assembly by grates.
is secure.
IMPORTANT: Make sure the appliance burn-
ers are level.
Installation Items Needed
• hardware package (provided with appli-
ance)
• approved fl exible gas hose and fi ttings (only
provided with TF burner system series) (if
allowed by local codes)
• sealant (resistant to propane/LP gas, not
provided)
• electric drill with 3/16" masonry drill bit
1. Apply pipe joint sealant lightly to male
threads of the 3/8 NPT side of gas fi tting
and connect to inlet side of gas control.
Remove gas fi tting from fl exible gas hose
(provided) before connecting to elbow
(see Figure 10).
2. Position appliance base assembly in
fi replace.
3. Mark screw locations through holes in
front panel of base (see Figure 11). If
installing in a brick-bottom fi replace, mark
screw locations in mortar joint of bricks.
4. Remove appliance base from fi replace.
5. Drill holes at marked locations using 3/16"
drill bit.
6. Attach base, through holes in back side pan-
els of base, to fi replace fl oor using masonry
screws provided in hardware package (see
Figure 11).
7. Connect to gas supply. See Connecting
To Gas Supply.
Flexible Gas Hose (if
allowed by local codes)
Figure 10 - Attaching Flexible Gas Hose
to Appliance Gas Regulator
12
INSTALLATION
Continued
Figure 11 - Attaching Base to Fireplace
CONNECTING TO GAS SUPPLY
requires a 3/8" NPT (National
Pipe Thread) inlet connection to
the pressure regulator.
vice person must connect ap-
pliance to gas supply. Follow all
local codes.
propane/LP appliance directly
to the propane/LP supply. This
appliance requires an external
regulator (not supplied). Install
the external regulator between the
appliance and propane/LP supply.
natural gas appliance to private
Appliance Gas
(non-utility) gas wells. This
Regulator
gas is commonly known as
wellhead gas.
SuperiorFireplaces.US.com
Masonry Screw
Floor
WARNING: This appliance
WARNING: A qualifi ed ser-
CAUTION: Never connect
WARNING: Never connect
126818-01C
Advertisement
Table of Contents
