Mounting In Portrait Position; Using Of Remote Sensor And Power Indicator - ViewSonic CDM4300R User Manual

1.6.

Mounting in Portrait Position

This display can be installed in portrait position.
1. Remove the table stand, if attached.
2. Rotate 90 degrees clockwise.
1.7.

Using of Remote sensor and power indicator

1. Push down the lens to have better remote control performance and easy to observe the light information
of power status..
2. Push up the lens before mounting the display for video wall application.
3. Pull/Push the lens until hearing the click sound.
Push up to collapse the lens
90
4
90
Push down to extend the lens