Remote Control; General Functions - ViewSonic CDM4300R User Manual

2.3.

Remote Control

2.3.1. General functions

1
2
3
4
5
6
7
8
9
10
11
12
[POWER] button
1
Press to switch on the display from standby mode.
Press again to turn it off and back into standby
mode.
[PLAY] button
2
Control playback of media files (for Media Input
only).
[ SOURCE] button
3
Press to toggle Video Source Menu. Press [ ] or
[ ] button to select one of the video sources among
Displayport, DVI-D, VGA, HDMI1, HDMI2, Media
Player, Browser or PDF Player. Press [OK] button.
[MENU] button
4
Press to turn the OSD menu on/off.
[ ] button
5
ve
Press to mo the selection up in OSD menu.
[ ] button
6
Press to decrease the value in OSD menu.
[OK] button
7
Press to activate the setting inside the OSD menu.
[ADJUST] button
8
Press to run the Auto Adjust function.
NOTE: This button is functional for VGA input only.
[ ] button
9
Press to move the se
[ ] MUTE button
10
Press to turn the mute function on/off.
11
Choose tasks or options.(for Media Input only).
20
[NUMERIC] buttons
12
Enter text for network setting.
Format button
13
Press to switch screen aspect ratio.
13
[EXIT] button
14
14 Press to turn back to the previous OSD menu.
[INFO] button
15
15
Press to turn on/off the information OSD displayed
on the upper right corner of the screen.
16
[ ] button
16
Press to increase the value in OSD menu.
17
[OPTION] button
17
Access currently available options, picture and
sound menus (for Media Input only).
18
[+] Volume up button
19
18
Press to increase the audio output level.
[-] Volume down button
19
Press to decrease the audio output level.
[ID SET] button
20 21
If a single large- screen matrix (video wall) is
created, set ID key to control each dispaly.
ID Remote Control:
21
You can set the remote control ID when you want to use
this remote control on one of several different displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID
enter the ID ode. The red LED lights up.
Press the
Mode. The red LED lights off.
Press the digit number [0] ~ [9] to select the display
you want to control.
For example: press [0] and [1] for display No.1,
press [1] and [1] for display No. 11.
The numbers available are from [01] ~[255].
2. Not pressing any button within 10 seconds will exit
the ID Mode.
3. If an error pressing of buttons other than the digits
occurred, wait 1 second after the red LED lights
off and then lights up again, then press the correct
digits again.
4. Press [ID
blinks twice and then lights off.
NOTE:
• Press [NORMAL] button. The green LED blinks
twice, indicating the display is in normal operation.
It is ncecssary to set up the ID number for each
display before selecting its ID number.
7
lec
tion down in OSD menu.
COLOR buttons
SET] button for more than 1 second to
[ID SET] button again will exit the ID
ENTER] button to confirm. The red LED