Removing The Stand And Mounting The Monitor - ViewSonic VA220-H User Manual

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading (W x H)
14 kg 75 x 75 mm
NOTE: Mounting kits are sold separately.
1. Turn off the monitor and disconnect all cables.
2. Place the monitor on a flat, stable surface with the screen facing down.
3. Remove the stand.
1
Interface Pad
(W x H x D)
N/A
1 2
2 3
Pad Hole
Ø 5 mm
3
11
Screw Screw
Specification Quantity
M4 x 10 mm 4 screws