Removing The Stand And Mounting The Monitor - ViewSonic VS19257 User Manual

Removing the Stand and Mounting the Monitor

NOTE: Only use UL Certified wall mount kits.
Refer to the table below for the standard dimensions for wall mount kits.
Maximum Hole pattern
Loading
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
1
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the device
onto the wall.
Interface Pad
(W x H) (W x H x D)
100 mm
Pad Hole
2
11
Screw Specification
& Quantity
M4 x 10 mm
4 pieces
2
1