Dirt Devil fusion Operating Manual page 47

9 After use
29
30
4. Next, remove the dirt bin cover from the
dirt bin (Fig. 29).
5. Hold the dirt bin over a dustbin with the fil-
ter inserted.
6. Only separate the dirt bin from the filter
over a dustbin (Fig. 30).
7. Tap lightly to knock out both parts
(Fig. 30) and remove coarser debris with
your hand.
8. If dirt bin and filter can no longer be com-
pletely emptied/cleaned
measure, proceed as described under
Chapter 9.3, 'Cleaning dirt bin and filter'.
through this
47