Compaq Evo N160 Series User Manual page 61

6. Click the CD or Floppy button.
7. Insert the CD or diskette into the proper drive when prompted
by Windows and click the Next button.
Microsoft Windows finds the CD or diskette and begins the
installation process.
Windows XP Home—To install software from a diskette, or
from a CD that does not automatically install, complete the
following steps:
1. Make sure the drive you will need is inserted into the
Modular Media Bay. (For information about inserting or
removing a drive, refer to the "Modular Media Bay" section
of Chapter 5.)
2. Close all programs.
3. Click the Start button on the Windows taskbar, then click
Control Panel.
4. Click the Add or Remove Programs icon. The Add or
Remove Programs dialog box is displayed with the
Currently installed programs panel.
5. Click the Add New Programs icon. The Add or Remove
Programs dialog box is displayed with a pane you can use to
install a program from your hard drive, a CD, a diskette or the
Microsoft Web site.
6. To install a program from a CD or diskette, click the CD or
Floppy button. The Install Program from Floppy Disk or
CD-ROM dialog box is displayed.
7. Insert the CD or diskette containing the software you want to
install into the drive.
8. Click Next, then follow the instructions on the screen.
Microsoft Windows finds the CD or diskette and begins the
installation process.
Evo Notebook N160 Series
1700 Series
Common Tasks
4–11