Compaq Evo N160 Series User Manual page 135

Solutions
See also
information about hard disk errors.
To repair the hard disk using the ScanDisk Utility, complete the
following steps:
1. Click the Start button, point to Programs, Accessories,
System Tools.
2. Click ScanDisk to open the ScanDisk dialog box.
Q. I receive a non-system disk or disk error message. What is
wrong?
A. If you have a non-system disk or disk error message, check the
following:
Check the diskette drive to see if you have a diskette in the
drive. When drive activity stops, remove the diskette and
press the Spacebar to continue the startup process.
If a diskette is not in the drive, the system files may have been
damaged. Refer to the operating system manual for
information about restoring your system.
8–10
"Hard Disk Errors" in Chapter 7 of this guide for
User Guide
Evo Notebook N160 Series