Siemens SITOP PSU8200 Manual page 4

Overview
● Display of the operating state using 3 LEDs
● "24 V O.K." signaling contact
● Remote "ON/OFF" contact for switching the power supply output in a no current condition
(only for 6EP3333-8SB00-0AY0 and 6EP3334-8SB00-0AY0)
● To increase the system availability, these reliable power supplies can be expanded using
SITOP supplementary modules (redundancy module, selectivity module, buffer module),
as well as SITOP DC-UPS modules
Ordering data
The following device versions are available:
Regulated power supply unit SITOP PSU·8200 1ph
Type
120/230 VAC input,
24 V / 5 A output
120/230 VAC input,
24 V / 10 A output
Input, 1 and 2-phase AC or DC,
Output 24 V DC / 20 A
Accessories
Type
Device identification labels 20 mm × 7 mm, Ti grey
4
Order number
6EP3333-8SB00-0AY0
6EP3334-8SB00-0AY0
6EP1336-3BA10
Order number
3RT2900-1SB20
Manual, 11.2014, C98130-A7633-A1-3-7629
SITOP PSU8200 1ph