Image Control - Night Owl NVR10 SERIES User Manual

7.2.2 Image Control

Display advanced settings which will allow you to flip your camera's image, adjust
BLC and IR-CUT modes.
Channel: allows you to select the channel to configure.
IR-Cut Mode: GPIO Auto; Color Mode; Black White Mode; Video Auto.
IR-Cut Delay: allows you to adjust the delay when the IR-CUT initiates. Selecting
"1" will be less delayed than selecting "36".
Lens Flip: allows you to flip the image (top to bottom) of the selected channel by
left clicking this box.
Angle Flip: allows you to flip the image (left to right) of the selected channel by
left clicking this box.
Backlight: allows you to enable or disable the backlight function of the selected
channel.
BLC Level: allows you to select Low, Middle or High options. By default this
option is set to the Middle option.
3D Noise Reduction: allows you to disable or set this option to Auto or Manual.
WDR: Wide Dynamic Range option allows the configuration of exposure in areas of
the frame to maintain optimum detail in both the shadows and highlights of the
image.
AGC: Auto Gain Control option allows the configuration of the brightness of
camera images, but also increase the image noise, users can adjust it from Low/
Middle/High or shut it down depending on the situation.
42 NVR10 Series Users Manual