Video/Power - Night Owl NVR10 SERIES User Manual

Chapter 4: Camera Installation

4.1 Video/Power

NOTE: Connect all cameras locally before final placement to ensure that all
components function properly.
1. Locate an included 60 foot PoE camera cable.
2. Connect one end of the cable to
the connector attached to the camera.
3. Plug the other end into a Video Input port on the back panel of the NVR.
4. Repeat for each camera, noting the channel number each camera is
plugged into.
* Cameras, additional cables, power adapters and
splitters only included in certain security kits. Check
the product packaging for detailed kit contents.
Make sure all cameras are working prior to mounting by
connecting them as described in the section above. Once all
cameras are confirmed to be fully operational, you can run
the cables and mount the cameras at their final locations.
18
Ethernet IP Camera
NVR10 Series Users Manual