Constructional Design - Siemens SITRANS VP300 Operating Instructions Manual

Electropneumatic positioner
Hide thumbs Also See for SITRANS VP300:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Constructional design

Connections, electrical
● Screw terminal
● Cable gland
Connections, pneumatic
How does it work?
● Range of stroke (linear actuator)
● Angle of rotation (part-turn actuator)
Mounting method
● On the linear actuator
● On the part-turn actuator
Material
● Housing 6DR63*0 (aluminum)
Weight, basic device
Manometer, steel
● Degree of protection
● Vibration resistance
Control
Control unit
1)
● Non-linearity
● Repeatability
● Hysteresis
● Temperature influence
● Shock influence effect and vibration influence effect
All percentage values refer to a 20 mm stroke range or 90° angle of rotation, measured as per IEC 61514-2
1)
30
2.5 AW28-12
M20x1.5 or ½-14 NPT
OPOS Interface (VDI/VDE 3847)
OPOS Interface (VDI/VDE 3847)
3 ... 60 mm (0.12 ... 2.36")
3 ... 150 mm (0.12 ... 5.91") (for selected actuators, see
Catalog FI 01, section "Electropneumatic positioners >
Ordering data SITRANS VP300")
30 ... 120°
See catalog FI 01, section "Electropneumatic positioners >
Order data SITRANS VP300"
See catalog FI 01, section "Electropneumatic positioners >
Order data SITRANS VP300"
EN 1706: EN AC-AlSi12(Fe) or EN AC-AlSi10Mg(Fe)
1.15 kg (2.535 lb)
IP44
In accordance with DIN EN 837-1
< 1 %
< 1 %
< 1 %
< 0.5%/10 K within the range -40 to +85 °C (-40 to +185
°F)
< 1% (20 ms/s
or 0.15 mm; 10 ... 500 Hz)
2
SITRANS VP300 (6DR63..)
A5E03359515-01, 03/2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

6dr63 series

Table of Contents