Connecting The Device - Siemens SITRANS VP300 Operating Instructions Manual

CAUTION
Ambient temperature too high
Damage to cable sheath.
● At an ambient temperature ≥ 60 °C (140 °F), use heat-resistant cables suitable for an ambient temperature at least 20
°C (68 °F) higher.

Connecting the device

Opening the device
Loosen the four fixing screws
①
Housing cover
②
Fixing screws
Connecting the device
1. Guide the connecting cable through the cable screwing
2. Connect the wires to the relevant connecting terminals
③
Two ground terminals
explosion protection, only the outer grounding terminal is fitted, and can be transferred to the inner connection if required.
①
Cable gland
②
Terminals
③
Ground terminals
Figure 6 Electric connection
SITRANS VP300 (6DR63..)
A5E03359515-01, 03/2011
②
of the housing cover
are available for connecting equipotential bonding conductors. In the case of devices without
①
. The screws are captive and cannot fall out of the screw joint.
①
.
②
with a torque of 0.5 Nm; observe the polarity when doing this.
15