Accessory Tool Connection And Use - Windsor Armada BRC 40/22 120V Operating Instructions Manual

Accessory Tool Connection and Use

HAND TOOL HAND TOOL
VACUUM HOSE
CONNECTION
VACUUM HOSE
SOLUTION QUICK
DISCONNECT
HANDTOOL POSITION
86409500 Operator's Manual - Armada BRC 40/22
NOTE: Use only manufacturer supplied accessory
tools. See Optional Accessories section.
°
1. Spin the deck 180
the front of the machine.
2. To connect solution hose pull back collar and insert
over machine mounted fitting, then release collar to
lock into place. Solution connection can remain
connected at all times.
3. Disconnect vacuum hose from the vacuum shoe
and connect the hand tool to the vacuum hose
connection as shown.
4. Select hand tool position on main rotary control
switch.
5. Press the top of the switch to turn solution on.
6. Press the bottom of the switch to turn solution off if
only the Vacuum will be used for any extended
period of time.
7. Squeeze handle on accessory tool to begin
cleaning.
Operations
so that the vacuum shoe is at
23