Accessory Tool Usage - Windsor CLP12 Operating Instructions Manual

Operations

Accessory Tool Usage

24
Use only one of the following acceptable accessory
tools.
8.600-002.0 - Handtool
8.600-000.0 - Double Dry Hand Tool
8.604-115.0 - Dblhdr Dualvac Upholstry Tool
8.603-154.0 - Hose Asm, Cst Handtool
8.600-061.0 - Standard Wand
8.600-060.0 - Deluxe Professional Wand
1. Pull back collar and insert over machine mounted
2. Lift door on front of vacuum shoe and insert 1 1/2
3. Turn on vacuum motor switch and set solution
4. Squeeze handle on accessory tool to begin
86403890 Manual Operators - Clipper 12 - 230V
fitting, then release collar to lock into place.
inch hose cuff into hole.
switch to intermittent position.
NOTE: Be sure brush switch is in off position and
brush is in storage position.
cleaning.