Sharp FO-885 Operation Manual page 52

Retrieving your messages
Note: You can also access the FO-885 for remote operation when the
reception mode is set to FAX or TEL/FAX. In this case, call the FO-885,
press the "#" key immediately after it answers, or during pseudo ringing
in TEL/FAX mode (before you hear the fax tone in either case), and then
continue from Step 2 below.
1
Call the FO-885 from a touch-tone
telephone. When your outgoing
message begins, press the "#" key on
the telephone.
• You will hear a short beep, and the
outgoing message will stop.
2
Enter your remote code number and
then # by pressing the keys on the
telephone.
• You will hear a series of beeps
equal to the number of messages
recorded, or one long beep if four
or more messages have been
received. The machine will then
play back the messages, beeping
once at the end of each message.
When all messages have been
played back, you will hear a long
beep.
• If no messages have been received,
you will hear a short beep. You can
either hang up, or perform any of
the operations described in the
following section Other remote
operations.
Remote Operations
2 2 2
(Example)
51