Sharp FO-885 Operation Manual page 15

Connections
Telephone line cord
Insert one end of the line cord into the socket on the back of the
machine marked TEL. LINE. Insert the other end into a wall
telephone socket.
Comments:
♦ Your fax is set for tone dialling. If you are on a pulse only dial line,
you must set the fax for pulse dialling by changing Option Setting 9.
This procedure is described in Chapter 8, Option Settings.
♦ If you intend to use a computer fax modem on the same phone line,
you must reset Option Setting 12 (Fax Signal Receive) to NO in
order to prevent transmission and reception errors. This procedure
is described in Chapter 8, Option Settings.
14
Be sure to insert the
telephone line cord into
the TEL. LINE socket.
Do not insert it into the
TEL. SET socket.