Sharp FO-885 Operation Manual page 114

Setting 5: RECALL TIMES
This sets the maximum number of times your fax will automatically
redial if the line is busy. Enter any number from 00 to 03.
♦ Initial setting: 02
FUNCTION
4
Enter a number
from 00 to 03
Setting 6: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension
phone connected to the same line as the fax, you can make the fax begin
reception by pressing 5, *, and * on the phone. Use this setting if you
want to use a number other than 5 to begin fax reception. You can enter
any number from 0 to 9.
♦ Initial setting: 5
FUNCTION
4
Enter a number
from 0 to 9
Setting 7: REMOTE RECEPTION SELECT
If you don't intend to use the above TEL/FAX REMOTE NUMBER, you
can turn detection of the number off. This will ensure that the fax never
mistakenly attempts to begin reception if it detects a signal similar to the
TEL/FAX REMOTE NUMBER while you are talking on an extension
phone. Press 1 to turn detection on, or 2 to turn detection off.
♦ Initial setting: 1
FUNCTION
4
YES NO
or
1 2
until
Press
display
shows:
TEL/FAX REMOTE #
until
Press
display
shows:
REMOTE RECEPTION
until
Press
display
shows:
TRANSACTION LIST
Option Settings
RECALL TIMES
STOP
TEL/FAX REMOTE #
STOP
REMOTE RECEPTION
STOP
113