Omron CPM1A Manual page 10

CPM1A-MAD11 Specifications
Item
Model
I/O type
Analog inputs g p Number of inputs
Input signal range
Maximum rated input
External input impedance
Resolution
Overall accuracy
Converted A/D data
Averaging function
Open-circuit detection function
Analog output g p Number of outputs
Output signal range
Allowable external output load resistance
External output impedance
Resolution
Overall accuracy
Set data (D/A conversion)
Conversion time
Isolation method
Specification
CPM1A--MAD11
Voltage
2 inputs (2 words allocated)
0 to 5 VDC, 1 to 5 VDC
0 to 10 VDC, --10 to 10 VDC
±15 V
1 MΩ min.
1/6000 (full scale)
y
25_C 0.3% full scale
0 to 55_C 0.6% full scale
16-bit binary (4-digit hexadecimal)
Full scale for --10 to 10 V: F448 to 0BB8 Hex
Full scale for other ranges: 0000 to 1770 Hex
Supported (Settable for individual inputs via DIP switch)
Supported
1 output (1 word allocated)
1 to 5 VDC, 0 to 10 VDC, or
--10 to 10 VDC
1 kΩ min.
0.5 Ω max.
1/6000 (full scale)
y
25_C 0.4% full scale
0 to 55_C 0.8% full scale
16-bit binary (4-digit hexadecimal)
Full scales for --10 to 10 V: F448 to 0BB8 Hex
Full scale for other ranges: 0000 to 1770 Hex
2 ms/point (6 ms/all points)
Photocoupler isolation between analog I/O terminals and internal circuits.
No isolation between analog I/O signals.
Current
0 to 20 mA or 4 to 20 mA
±30 mA
250 Ω
0.4% full scale
0.8% full scale
0 to 20 mA or 4 to 20 mA
600 Ω max.
—
Micro Programmable Controller
CPM1A
A--31