Storing And Handling Media - Oki es7120 Reference Manual

> If "Load Paper TrayX" message is displayed, then loading the requested paper into
the indicated tray will cause the printer to automatically resume printing. If the
paper is loaded into a tray other than the one indicated, then pressing the ON
Line button will allow the printer to resume printing if "Auto Tray Change" is
enabled.
> When both Auto Resize and Media Check are ON, the paper size requested, via the
driver, will not be enforced because Auto Resize overrides the paper size aspect of
Media Check. If you want to enforce a specific paper size, then it is necessary to
disable Auto Resize via the Control Panel's Paper Menu.
Express print
Express Print occurs when Media Check is turned off. If you wish to print on Custom Size
paper without setting the Size or Type at the control panel, you can use the driver to turn
off Media Check. When in this mode, you can leave the default settings in the printer, and
it will assume the paper you put in the tray selected in your driver is the correct size and
type to match the output from your application. This allows you to switch between paper
sizes easily without configuring custom paper sizes at the printer. It is up to the operator
to load the desired media into the correct trays.
S
TORING AND HANDLING MEDIA
Even for suitable papers, poor storage conditions may lead to a change in the paper quality,
paper jams, poor print quality and printer breakdown. Take note of the following points
when storing paper:
> Store paper at a temperature of 50 to 86°F (10 to 30°C), with a relative humidity of
30 - 65%.
> After opening a ream of paper, use the original cover sheets to wrap up the paper
not used and store it in a cabinet or a location with low humidity.
> Store the paper flat, not on its edge.
> Ensure that the paper is stored properly without being bent or curled.
> Store the paper in a location not exposed to direct sunlight.
It is important to follow the manufactures orientation instruction.
Example:
Print media > 32