Starting Engine - Subaru impreza 2017 Owner's Manual

ACC
. Under other conditions: ON
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
clutch pedal (MT models) or brake pedal
(CVT models) released. The status of the
push-button ignition switch then changes
to ON .
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.

Starting engine

1. Apply the parking brake.
2. Shift the shift lever to neutral (MT
models) or the select lever to the P
(Park) position (CVT models).
3. Depress the brake pedal.
4. Depress the clutch pedal (MT models).
In case of emergency/Access key fob
5. Hold the access key fob with the
buttons facing you, and touch the push-
button ignition switch with it.
When the communication between the
access key fob and the vehicle is com-
pleted, a chime (ding) will sound. At the
same time, the push-button ignition switch
turns to the ACC or ON position.
6. After the push-button ignition switch
turns to the ACC or ON position, while
depressing the brake pedal (all models)
and the clutch pedal (MT models), press
the push-button ignition switch.
if access key fob does not operate properly
NOTE
If the engine does not start even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
9-19