Bsd/Rcta (If Equipped); System Features - Subaru impreza 2017 Owner's Manual

Hide thumbs Also See for impreza 2017:
Table of Contents

Advertisement

7-48
Starting and operating/BSD/RCTA

BSD/RCTA (if equipped)

The BSD/RCTA consists of rear radar with
Blind Spot Detection and Rear Cross
Traffic Alert.
These functions enable the system to
detect objects or vehicles to the rear,
drawing attention to the driver when
changing a lane or when driving in
reverse.
WARNING
The driver is responsible for driving
safely. Always be sure to check the
surroundings with your eyes when
changing lanes or reversing the
vehicle.
The system is designed to assist the
driver by monitoring the rear and
side areas of the vehicle during a
lane change or reversing. However,
you cannot rely on this system
alone in assuring the safety during
a lane change or reversing. Over-
confidence in this system could
result in an accident and lead to
serious injury or death. Since the
system operation has various limita-
tions, the flashing or illumination of
the BSD/RCTA approach indicator
light may be delayed or it may not
operate at all even when a vehicle is
present in a neighboring lane or
approaching from either side.
The driver is responsible for paying
attention to the rear and side areas
of the vehicle.

System features

BSD/RCTA consists of the following func-
tions.
. To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching at
high speed while driving the vehicle (Blind
Spot Detection)
. To detect a vehicle approaching from
the right or left while reversing the vehicle
(Rear Cross Traffic Alert)
The system uses radar sensors for the
above functions.
NOTE
The BSD/RCTA radar sensor has been
certified by the radio wave related laws
of the U.S. and Canada. When driving
in other countries, certification of the
country where the vehicle is driven
must be obtained. For certification in
the U.S. and Canada, refer to Certifica-
tion for the BSD/RCTA
Blind Spot Detection (BSD)
1)
Operating range
The system notifies the driver of the
presence of vehicles in its blind spot.
If the system detects a vehicle in its blind
spot, it warns the driver by illuminating the
BSD/RCTA approach indicator light(s) on
the outside mirror(s).
7-55.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crosstrek 2022

Table of Contents