Using The Shift-Key To Change The Main Monitor - Mitsubishi Electric FR-PU07 Instruction Manual

2.1.2 Using the SHIFT-key to change the main monitor

When "0" (initial value) is set in the Pr. 52 "DU/PU main display data selection", merely pressing the SHIFT-key calls 6 different
monitor screens in sequence.
Switch power on or press
MON-key
Top two monitor types of the first
priority monitor, output frequency,
output current and output voltage
are displayed in line
When the first monitor is
other than output frequency,
output current and output
voltage
When output frequency is the
first priority monitor (Initial
setting)
Output frequency
monitor
3-step monitor
Monitor when the first monitor is other
than output frequency, output current
and output voltage.
(When electric thermal relay function load factor is set as
the first priority monitor)
When output current is the
first priority monitor
Output current
monitor
Selective monitor
FUNCTIONS
When output voltage is the
first priority monitor
2
Output voltage
monitor
Alarm history monitor
13