Mitsubishi Electric FR-PU07 Instruction Manual page 27

Factory setting
The monitor displayed at powering on is the first priority monitor. Refer to page 14 for the setting method of the first priority monitor.
First priority monitor
--- STOP EXT
(Output frequency monitor)
³ For the set value of "17, 18, 24", their monitors are displayed at the second monitor instead of output current monitor.
First priority monitor
Output frequency monitor
· For the set value of "19 to 23, 25, 32 to 34, 50 to 54", their monitors are displayed at the third monitor instead of output voltage
monitor.
First monitor
Output frequency monitor
REMARKS
The setting range of Pr. 52 "DU/PU main display data selection" differs according to the inverter. Refer to the inverter instruction manual for details.
READ:
List
0.00
Hz
(Output current monitor)
Second monitor
Monitor of the set value "17, 18, 24"
Second monitor
Output current monitor
Second monitor
READ: List
120.00
A
--- STOP EXT
Monitor of the set value "19 to 23, 25"
FUNCTIONS
Third monitor
READ:
List
0.00
V
--- STOP EXT
(Output voltage monitor)
Third monitor
Output voltage monitor
Third monitor
2
17