Mitsubishi Electric FR-PU07 Instruction Manual page 77

Verifying the parameters
All the parameter settings stored in the FR-PU07 are verified with those which are stored in the inverter.
Verification cannot be performed between different inverter series.
Description
Refer to page 65 and copy the parameter settings of the verify
source inverter to the FR-PU07.
Connect the FR-PU07 to the inverter to be verified.
Press the FUNC-key
The function menu appears.
Select the "multiple copies".
Using the Cursor-keys ▲/▼, move the
cursor to "12 PRCpy set" and press the
READ-key.
Select the copy area.
Point the cursor to the copy area that
stores the parameter settings required
verification, and press the READ-key.
Display Description
Select the "Verifying".
Using the Cursor-keys ▲/▼, point the
cursor to "3 Verifing" to press the
READ-key.
‘
1 MONITOR
2 PU Oper
3 Pr.List
Verification of the parameter settings is
4 Pr.Clear
selected, and the confirmation screen
for verification execution is displayed.
9 S/W
10 Selectop
11 Option
Press the WRITE-key.
12 ‘ PRCpy set
Start verification of parameter settings
stored in the FR-PU07 and parameter
settings of the inverter.
1 ‘ Copy area 1
2 Copy area 2
3 Copy area 3
FUNCTION MENU
Display
Copy area 1
1 Read VFD
2 Write VFD
‘
3 Verifing
012
Verify Area 1
WRITE:Executing
ESC:Cancel
Param Copy
3
Verifying
Please Wait
67