Hardware Connection - Zte ZXHN H268A User Manual

Figure 3 The Back Panel
Table 3 describes the interfaces and buttons on the back panel of the ZXHN
H268A.
Table 3 The Back Panel
Interface/Button Function
RJ-11 port: It is used to connect to the VDSL2, or ADSL2+ uplink
DSL
access network.
RJ-11 port. It is used to connect to the phone through the telephone
Phone1~Phone2
line.
RJ-45 port. It is used to connect the modem to computer, STBs or
LAN1～LAN4
other network devices.
WAN RJ-45 port. It is used to connect to the network provided by the ISP.
WPS WLAN Protected Setup
During power on period, hold on this button for more than 5 seconds
Reset to reset the current settings to the factory default setting, and then
the system automatically restarts.
WLAN WLAN switch. Turn on or turn off the WLAN.
Power Power supply port. It is connected to the power adapter.

Hardware Connection

Figure 4 shows the devices that are connected to interfaces of the ZXHN
H268A
Confidential and Proprietary Information of ZTE CORPORATION 7
ZXHN H268A User Manual