Agilent Technologies 54621A User Manual page 267

Manufacturer's Name:
Manufacturer's Address:
Declares, that the product
Product Name:
Model Number:
Product Options:
Conforms with the following product stardands:
EMC Standard
IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998
CISPR 11:1990/EN 55011:1991
IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995
IEC 61000-4-3:1995/EN 61000-4-3:1995
IEC 61000-4-4:1995/EN 61000-4-4:1995
IEC 61000-4-5:1995/EN 61000-4-5:1995
IEC 61000-4-6:1996/EN 61000-4-6:1996
IEC 61000-4-11:1994/EN 61000-4-11:1994
Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1
Safety IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995
Canada: CSA C22.2 No. 1010.1:1992
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
(including 93/68/EEC) and carries the CE-marking accordingly (European Union).
[1]
The product was tested in a typical configuration with Agilent Technologies test systems.
Date: 2002-3-11
For further information, please contact your local Agilent Technologies sales office, agent or distributor.
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Agilent Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, Colorado
80907 U.S.A.
Digitizing Oscilloscope
54641A
This declaration covers all options of the above product(s).
Name
Ken Wyatt / Product Regulations Manager
Limit
[1]
Group 1 Class A
4 kV CD, 8 kV AD
3 V/m, 80-1000 MHz
0.5 kV signal lines, 1 kV power lines
0.5 kv line-line, 1 kV line-ground
3V, 0.15-80 MHz
1 cycle, 100%