Agilent Technologies 54621A User Manual page 247

* Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and
±10 ° C from firmware calibration temperature.
Display System
Display
Throughput of Analog Channels 25 million gray scale vectors/sec per channel
Resolution
Controls
Built-in Help System
Real Time Clock
Measurement Features
Automatic Measurements
Voltage (analog channels only) Peak-to-Peak, Maximum, Minimum, Average, Amplitude, Top, Base, Overshoot,
Time
Counter
Threshold Definition
Cursors
Waveform Math
7-inch raster monochrome CRT
255 vertical by 1000 horizontal points (waveform area)
32 levels of gray scale
Waveform intensity on front panel
Vectors on/off; infinite persistence on/off
8 x 10 grid with continuous intensity control
Key-specific help in 11 languages displayed by pressing and holding key or softkey of
interest
Time and date (user setable)
Measurements are continuously updated
Cursors track current measurement
Preshoot, RMS (DC)
Frequency, Period, + Width, - Width, and Duty Cycle on any channels.
Rise time, Fall time, X at Max (Time at max volts), X at Min (Time at min volts), Delay, and
Phase on analog channels only.
Built-in 5-digit frequency counter on any channel. Counts up to 125 MHz
Variable by percent and absolute value; 10%, 50%, 90% default for time measurements
Manually or automatically placed readout of Horizontal (X,
∆
Vertical (Y, Y). Additionally digital or analog channels can be displayed as binary or hex
values
1-2, 1*2, FFT, differentiate, integrate.
Source of FFT: differentiate, integrate, analog channels 1 or 2 (or 3 or 4 for 54624A), 1-2,
1+2, 1*2
Performance Characteristics
Agilent 54620-series Performance Characteristics
∆ ∆
X, 1/ X) and
7-9