Siemens simatic S7-1500 Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 32 DO; electrically isolated in groups of 8
● Rated output voltage 24 V DC
● Rated output current 0.5 A per channel
● Assignable substitute values (per channel)
● Configurable diagnostics (per channel)
● Suitable for solenoid valves, DC contactors, and indicator lights
● Hardware compatible with digital output module:
– DQ 16x24VDC/0.5A ST (6ES7522-1BH00-0AB0)
– DQ 16x24VDC/0.5A HF (6ES7522-1BH01-0AB0)
– DQ 32x24VDC/0.5A ST (6ES7522-1BL00-0AB0)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode
Module-internal Shared Output (MSO)
Configurable submodules / submodules
for Shared Device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front cover
Other components
The following component must be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find additional information on accessories in the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
12
Firmware version of
the module
(TIA Portal) as of V13,
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
Digital output module DQ 32x24VDC/0.5A HF (6ES7522-1BL01-0AB0)
Configuration software
STEP 7
SP1 with HSP 0143
X
X
X
X
X
X
Manual, 09/2016, A5E35683508-AB
GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
--- / X
X
X
---
X
(PROFINET IO only)
X
(PROFINET IO only)