Output Settings - McIntosh D1100 Owner's Manual

RENAME: OPTI 1
>MEDIA
Figure 13
RENAME: OPTI 1
>MEDIA S
Figure 14
RENAME: OPTI 1
>MEDIA SV
Figure 15
RENAME: OPTI 1
>MEDIA SVR
Figure 16
20. To save the new name, press and hold in the IN-
PUT Control until "SETUP: MEDIA SERVER ,
ON / Rename" appears on the Front Panel Infor-
mation Display. Refer to figure 17.
SETUP: MEDIA SVR
On/Name (Hold INPUT)
Figure 17
21. Exit the SETUP Mode by several presses of the
INPUT Control.
Note: For convenience, an "Input Assignment Chart"
on a separate sheet "Mc5A/5B" has been pro-
vided to keep track of changes.

Output Settings

The Output Settings provide the ability to change how
the D1100 Output 1, Output 2 and Headphones func-
<
tion.
OUTPUT 1 and 2:
By defaut OUTPUT 1 and 2 are set to go On/Off by
using the Front Panel OUTPUT 1 and 2 Push-buttons
<
or by using the OUTPUT 1 and 2 Push-buttons on the
Remote Control. If it is desirable to have OUTPUT 1
and/or 2 always On, regardless of the OUTPUT 1 and
2 Push-button settings, perform the following:
1. Press and hold in the INPUT Control to enter the
<
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until "SETUP: Out-
puts, (Hold INPUT)" appears on the Information
Display. Refer to figure 23.
<
3. Press and hold in the INPUT Control until
"SETUP: OUTPUT 1, Switched" appears on the
Display. Refer to figure 24.
4. Rotate the VOLUME (ADJUST) Control to change
from the "Switched" setting to "Unswitched".
Refer to figure 25.
5. In a similar manner, perform steps 3 and 4 to
change the OUTPUT 2 setting. Refer to figures 26
and 27.
SETUP: Outputs
(Hold INPUT)
Figure 23
SETUP: OUTPUT 1
Switched
Figure 24
SETUP: OUTPUT 1
Unswitched
Figure 25
SETUP: OUTPUT 2
Switched
Figure 26
SETUP: OUTPUT 2
Unswitched
Figure 27
The D1100 Default Setting for using Headphones is to
automatically mute all the Output Connectors when
the Headphone Cable Plug is inserted into the D1100
Front Panel HEADPHONES Jack. There are two
available settings:
Mute All Outputs
Mute No Outputs
6. Rotate the INPUT Control until "SETUP: HEAD-
PHONES, Mute All Outputs " appears on the
Information Display. Refer to figure 28.
SETUP: HEADPHONES
Mute All Outputs
Figure 28
7. Rotate the VOLUME (ADJUST) Control to change
the current HEADPHONES setting from "Mute
All Outputs" to either "Mute Main Output" or
"Mute No Outputs". Refer to figures 28 and 29.
SETUP: HEADPHONES
Mute No Outputs
Figure 29
8. Exit the SETUP Mode by several presses of the
INPUT Control.
Setup, con't
15