Specifications - McIntosh D1100 Owner's Manual

Audio Specifications
Frequency Response
+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz
Total Harmonic Distortion
0.0015% (at 2V Output)
Fixed Output level
2.0Vrms Unbalanced
4.0Vrms Balanced
Variable Output level
0 - 8.0Vrms Unbalanced
0 - 16.0Vrms Balanced
Signal To Noise Ratio (A-Weighted)
111dB
Dynamic Range
100dB
Output Impedance
100 ohms Unbalanced and Balanced
Headphone Load Impedance
20 to 600 ohms
26
Digital Audio Specifications
Digital Input Signal Format
Coaxial, Optical and AES/EBU Inputs - SPDIF
MCT and USB Inputs - PCM, DSD
Digital Input Sample Rate
Coaxial, Optical and AES/EBU: 44.1kHz to
MCT: 44.1kHz, 16-Bit
(CD)
DSD64 (SACD)
USB: 44.1kHz to 384kHz, 32-Bit
DSD64, DSD128, DSD256,
DXD352.8kHz, DXD384kHz
Digital Inputs
Coaxial: 0.5V p-p/75 ohms
Optical: -15dbm to -21dbm (TOS Link)
MCT: 0.5V p-p/75 ohms
USB: USB Type B Connector
General Specifications
Power Control
(PCM)
12VDC, 25mA
Power Requirements
Field AC Voltage conversion of the D1100 is not pos-
sible. The D1100 is factory configured for one of the
192kHz, 24-Bit
following AC Voltages:
100 Volts, 50/60Hz at 30 watts
110 Volts, 50/60Hz at 30 watts
(PCM)
120 Volts, 50/60Hz at 30 watts
220 Volts, 50/60Hz at 30 watts
230 Volts, 50/60Hz at 30 watts
240 Volts, 50/60Hz at 30 watts
Standby Power, less than 0.5 watts
Note: Refer to the rear panel of the D1100 for the correct
Overall Dimensions
Width is 17-1/2 inches (44.5cm)
Height is 6 inches (15.2cm) including feet
Depth is 19 inches (48.3cm) including the Front Panel,
Knobs and Cables
Weight
26 pounds (11.8 kg) net, 41 pounds (18.6 kg) in ship-
ping carton
Shipping Carton Dimensions
Width is 27 inches (68.6cm)
Height is 12 inches (30.5cm)
Depth is 25 inches (63.5cm)

Specifications

voltage.