Sub Pcb Installation(Optional) - Samsung AR**HS Installation Manual

Sub PCB installation(optional)

Only for multi system
(Wried remote controller, central remote controller etc.)
1 Turn the power off and take off the cover panel of the
indoor unit.
1
2 Attach the Sub PCB to the Case Sub PCB.
3 Assemble the Case Sub PCB to the indoor unit.
Case Sub PCB
Sub PCB
4 Find the PCB wire, and connect the wire to the Sub PCB
as seen in the picture.
24 English
A3050_EU_Best model_IM_DB68-06152A-00_EN.indd 24
2
5 Connect the wire(remote controller, central remote
controller etc) to the Sub PCB.
6 Assemble the Cover PCB and the front panel.
If the Sub PCB is not installed, arrange the wire for

multi system (connection) as shown in the illustration.
Wire for multi
system connection
NOTE
• The Sub PCB is attached to be controlled by the wired
remote controller and central controller.
2016/4/20 14:10:28