Canon i-SENSYS MF229dw Service Manual page 91

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the DADF Unit + Reader Unit > Procedure
5) Open the DADF Unit + Reader Unit [1].
6) Remove the DADF Unit + Reader Unit [1].
• 2 Claws [2]
CAUTION:
• Be sure to install/remove the unit carefully so as not to damage the Flat Cable [3]
and harness [4] with the [A] part.
[A]
[4]
[3]
• Be sure to place the unit so as not to damage the Flat Cable [3] and harness [4].
[3]
[4]
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the DADF Unit + Reader Unit > Procedure
2x
[2]
NOTE: How to assemble the DADF Unit + Reader Unit
Be sure to secure the 2 claws [1] of the Hinge Arm to the 2 hooks [2] of the Reader Unit.
F-4-40
F-4-41
[1]
[2]
4-29
F-4-42
[1]
[2]
F-4-43
4-29