Canon i-SENSYS MF229dw Service Manual page 179

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Speaker (Fax Model + Duplex Model) > Procedure
2) Free the Speaker Harness [1] from the Harness Guide [A], and pass it through the hole [B]
of the Right Plate to the outside.
1x
[1]
[A]
3) Remove the speaker [1].
• 1 Screw [2]
• 2 Hook[3]
1x
[1]
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Speaker (Fax Model + Duplex Model) > Procedure
[B] [1]
F-4-330
[2]
[3]
F-4-331
NOTE: How to assemble the speaker
Be sure to assemble it with the harness [1] routed upwards.
(Otherwise, the connector of the Speaker Harness cannot reach the Main Controller.)
[1]
4-117
[1]
F-4-332
4-117