Set Up The Zywall/Usg Ipsec Vpn Tunnel Of Corporate Network (Branch) - ZyXEL Communications ZyWALL 110 Handbook & Instructions

www.zyxel.com
Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway and click Show
Advanced Settings. Configure Authentication > Peer ID Type as Any to let the
ZyWALL/USG does not require to check the identity content of the remote IPSec
router.
Figure 116 CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show
Advanced Settings > Authentication > Peer ID Type
Set Up the ZyWALL/USG IPSec VPN Tunnel of Corporate
Network (Branch)
In the ZyWALL/USG, go to CONFIGURATION > Quick Setup > VPN Setup Wizard,
use the VPN Settings wizard to create a VPN rule that can be used with the
remote ZyWALL/USG. Click Next.
Figure 117 Quick Setup > VPN Setup Wizard > Welcome
74/255