How To Enable Device Ha Pro - ZyXEL Communications ZyWALL 110 Handbook & Instructions

How to Enable Device HA Pro

The Device HA feature acts as a failover when one of the devices in the network is
dead or can't access the Internet. Therefore, this is a popular feature for network
environments. In the previous firmware version, the USG supports AP
(Activate-Passive/Master-Backup) mode. In V4.20, the Device HA feature is enhanced
and named Device HA Pro.
Figure 335
Note:
In Device HA Pro, a "heartbeat link" is added for monitoring the interface
status and synchronizing settings. Follow the steps below to deploy the
Device HA Pro feature in your network environment.
Figure 336
www.zyxel.com
220/255